Trouble's Gone

"Steve is equipped with Electronic Fool Injection" (itsalwayssteve) 04/27/2017 at 11:49 • Filed to: cst, CLASSIC SOFT TRIM, yenko, custom leather

3

25

!!!error: Indecipherable SUB-paragraph formatting!!! has been sitting in the shop a !!!error: Indecipherable SUB-paragraph formatting!!! . I guess if you’re spending $80k on a Camaro you have time to wait for it to be done right. !!!error: Indecipherable SUB-paragraph formatting!!! is a cool guy.

And it has orange (amber) leather interior:

I like that color.

As with all fresh-installed CST leather interiors, the wrinkles will fall out over the next few weeks. The kit has to be cut slightly larger than the foam it goes over.

We didn’t want to risk damaging it with a heat gun when parking the car outside in 80 degree weather for a day or two would have the same effect. The key was locked in the boss’ desk.

HammerheadFistpunch > Steve is equipped with Electronic Fool Injection 04/27/2017 at 11:56

0

Those seats look great. I want new seats so bad.

davesaddiction @ opposite-lock.com > Steve is equipped with Electronic Fool Injection 04/27/2017 at 11:57

1

The modifications might be great, but their logo is just terrible.

Just looks like someone’s personal monogram...

TheRealBicycleBuck > Steve is equipped with Electronic Fool Injection 04/27/2017 at 12:01

0

When I was a kid, I swam competitively. On the team were a couple of brothers with the last name Hamburger. I can’t recall their first names, nor can I remember their dad’s first name. But I do remember their mom.

Her name was Patty.

On forms requiring the last name first, she became Hamburger Patty.

I wonder if she thought about that before getting married.

(I’m sure her full name was Patricia, but everyone called her Patty and Patricia just isn’t nearly as funny.)

Takuro Spirit > Steve is equipped with Electronic Fool Injection 04/27/2017 at 12:02

1

No matching door cards or anything? I’d like the color picked up there or on the center console or somewhere else than just the seats.

PS9 > Steve is equipped with Electronic Fool Injection 04/27/2017 at 12:04

0

That lettering combo is really...unfortunate.

Man, sweet camaro! How did you get the money for it? Actually, I’ve never seen you go to work or anything and you have this Camaro and a $200k house...

Don’t worry about it. I’m in the...uhh, recreational sector of the economy. Yeah, that. If you want someone to S yo C, just let me know and I might squeeze you in for a discount.

What?

Hit me up before the weekend, clientele gets busy around that time if you still want it. *drives away*

Ess my See? I don’t get it... Oh! He’ll search my craigslist for vacation homes! That must be what he meant by the ‘recreational sector’. But does it really pay well enough to get a Yenko Camaro and huge house? Maybe I got into the wrong business!

!!!error: Indecipherable SUB-paragraph formatting!!!

Steve is equipped with Electronic Fool Injection > davesaddiction @ opposite-lock.com 04/27/2017 at 12:04

0

Tripper > davesaddiction @ opposite-lock.com 04/27/2017 at 12:07

1

It’s the “Y” totally ruins it. Makes it look like a knockoff handbag.

EDIT: I now realize that you were referring to the logo in general not just how it was executed on those seat covers. I don’t disagree, but I like the real font much more.

Steve is equipped with Electronic Fool Injection > Takuro Spirit 04/27/2017 at 12:07

0

The 16 Camaro has door cards that can’t really be taken apart easily and we don’t do custom sewing. We’d have had to break door panels and plastic welds.

Tripper > Steve is equipped with Electronic Fool Injection 04/27/2017 at 12:09

0

I have to agree with Dave, seats look awesome, logo is whackcity.

Takuro Spirit > Steve is equipped with Electronic Fool Injection 04/27/2017 at 12:11

0

Sounds like fun.

davesaddiction @ opposite-lock.com > Steve is equipped with Electronic Fool Injection 04/27/2017 at 12:14

0

Not saying it’s not classic, just bad.

R Saldana [|Oo|======|oO|] - BTC/ETH/LTC Prophet > Steve is equipped with Electronic Fool Injection 04/27/2017 at 12:18

0

Where are you located, could you replicate Focus ST2 seats, partial leather and alcantara seats?

Steve is equipped with Electronic Fool Injection > HammerheadFistpunch 04/27/2017 at 12:21

0

We have a pattern:

Click here for .pdf

gawdzillla > Steve is equipped with Electronic Fool Injection 04/27/2017 at 12:23

0

for some reason i don’t like those wheels on a camaro, IMO they belong to a mustang

That Bastard Kurtis - An Attempt to Standardize My Username Across Platforms > Steve is equipped with Electronic Fool Injection 04/27/2017 at 12:31

0

This is relevant to my interests. I’ll get my wife sewing right away.

DipodomysDeserti > Steve is equipped with Electronic Fool Injection 04/27/2017 at 12:34

0

I kind of want those color seats in my Jeep.

DipodomysDeserti > Steve is equipped with Electronic Fool Injection 04/27/2017 at 12:37

0

It looks like a college logo.

Steve is equipped with Electronic Fool Injection > R Saldana [|Oo|======|oO|] - BTC/ETH/LTC Prophet 04/27/2017 at 12:38

0

Here’s the Focus ST we have

I’m in Charlotte, but there are branches across the US.

Tapas > Steve is equipped with Electronic Fool Injection 04/27/2017 at 13:53

0

Doesnt it look off to only have seats in a different color, while all the other leather trim is a different color?

Bman76 (hates WS6 hoods, is on his phone and has 4 burners now) > Steve is equipped with Electronic Fool Injection 04/27/2017 at 14:09

0

Your work looks great, the aesthetic of the rest of the car is pretty terrible though.

Steve is equipped with Electronic Fool Injection > Tapas 04/27/2017 at 14:25

2

If it were me, I’d have done the console lid and door pads too, but they’re a huge pain in the ass to do and they’re already covered in leather or vinyl from the factory so they’re not in our kit. To do the door armrests, we actually have to break the plastic welds and then reattach them with plastic welds. It almost never looks right.

Tapas > Steve is equipped with Electronic Fool Injection 04/27/2017 at 16:06

0

Well that sucks. Factory or nothing is not a direction I want our cars to go in.

Is it possible to cut/rip out a bunch of the factory leather, leaving a strip of factory leather at the plastc welds? And then, sow the new leather onto the remaining strip of factory leather...

I know, still a pain in the ass. But you’re not breaking and really making plastic welds.

Steve is equipped with Electronic Fool Injection > Tapas 04/27/2017 at 16:47

0

Here in the shop where I work we do very little actual sewing. And on the door panels it’s usually vinyl until you step up to a luxury brand. It can be done, but it’s a pain in the ass.

Just like with 15+ Mustangs, the door panel is half vinyl and half cloth so we usually leave them. Our door panel vinyl won’t stick to Ford vinyl.

To do it right:

remove factory panel

remove cloth and vinyl pieces

strip plastic door panel of all foam and glue

glue new foam in place

cut to shape

wait for adhesive to cure

spray more adhesive

place our vinyl over foam

smooth everything out

Takes about 2 hours per panel, and in a production shop like this one we don’t have the time to do it.

CaptDale - is secretly British > Steve is equipped with Electronic Fool Injection 04/27/2017 at 18:20

0

I don’t like that...

Tapas > Steve is equipped with Electronic Fool Injection 04/28/2017 at 01:09

0

Gotcha. That is a lot of work.